RQR1

KEY FEATURES

  • Relay output
  • Multi-function or mono-function
  • Multi-range
  • Multi-voltage
  • Screw terminals
  • LED status indicator
FunctionsTimingOutputNominal ratingConnectionsSupply voltageCode
Q0,1 s →100 h2 open contacts2 x 8 AScrew terminals24 V ⎓ / 24 →240 V ∿88866175

Specifications


Timing ranges (7 ranges) 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h
Repetition accuracy with constant parameters ± 0.5 % (IEC/EN 61812-1)
Drift Temperature ± 0,05 % / °C
Drift Voltage ± 0,2 % / V
Display accuracy according to IEC/EN 61812-1 ± 10 % / 25 °C
Immunity from micro power cuts : typical < 10 ms
Minimum pulse duration typically 30 ms
Minimum pulse duration typically (under load) 100 ms
Maximum reset time by de-energisation typically 120 ms

Multi-voltage power supply Depending on version
Frequency (Hz) 50 / 60
Operating factor 100 %
Operating range 85 →110 % Un
Max. absorbed power 15 VA (400 V∿) 50 VA (240 V∿) 0,7 W (24 V⎓) 1,2 VA (12 V∿) 0,5 W (12 V⎓)

Rated power 2000 VA/80 W
Maximum breaking current 8 A∿ 250 V∿ resistive 8 A⎓ 30 V⎓ resistive
Minimum breaking current 10 mA / 5 V⎓
Voltage breaking capacity 250 V∿ / 8 A∿ resistive 250 V⎓ / 0,3 A resistive
Electrical life (operations) 105 8 A 250 V∿ resistive
Mechanical life (operations) 10 x 106
Breakdown voltage acc. to IEC/EN 61812-1 2,5 kV / 1 min / 1 mA / 50 Hz
Impulse voltage acc. to IEC/EN 60664-1, IEC/EN 61812-1 5 kV wave 1.2 / 50 μs
2 changeover relays, AgNi (cadmium-free) 2 C/O RQR1- RQR6 2 open contacts

Conformity to standards IEC/EN 61812-1 IEC/EN 61000-6-1 IEC/EN 61000-6-2 IEC/EN 61000-6-3 IEC/EN 61000-6-4
Certifications CE, UL, cUL, CSA, GL
Temperature limits use (°C) -20 →+60
Temperature limits stored (°C) -30 →+60
Installation category (acc. to IEC/EN 60664-1) Voltage surge category III
Creepage distance and clearance acc. to IEC/EN 60664-1 4 kV / 3 mm
Protection (IEC/EN 60529) IP20
IP40
Degree of protection acc. to IEC/EN 60529 Front face IP50
Vibration resistance acc. to IEC/EN 60068-2-6 20 m/s2 10 Hz →150 Hz
Relative humidity no condensation acc. to IEC/EN 60068-2-30 93 % non-condensing
Electromagnetic compatibility - Immunity to electrostatic discharges acc to IEC/EN 61000-4-2 Level III (Air 8 kV / Contact 6 kV)
Immunity to radiated, radio-frequency, electromagnetic field acc. IEC/EN 61000-4-3 Level I (1 V/m : 2,0 G Hz →2,7 G Hz) Level II (3 V/m : 1,4 G Hz →2,0 G Hz) Level III (10 V/m : 80 M Hz →1 G Hz)
Immunity to rapid transient bursts acc. to IEC/EN 61000-4-4 Level III (direct 2 kV / Capacitive coupling clamp 1 kV)
Immunity to shock waves on power supply acc. to IEC/EN 61000-4-5 Level III (2 kV / common mode 2 kV/residual current mode 1 kV)
Immunity to radio frequency in common mode acc. to IEC/EN 61000-4-6 Level III (10V rms : 0.15 M Hz to 80 M Hz)
Immunity to voltage dips and breaks acc. to IEC/EN 61000-4-11 0 % residual voltage, 1 cycle 70 % residual voltage, 25/30 cycles
Mains-borne and radiated emissions acc. to EN 55022 (CISPR22), EN55011 (CISPR11) Class B
Fixing : Symmetrical DIN rail 35 mm
Terminal capacity Single-wire without ferrule 1 x 0,5 →3,3 mm2 (AWG 20 →AWG 12) 2 x 0,5 →2,5 mm2 (AWG 20 →AWG 14)
Terminal capacity Multi-wire with ferrule 1 x 0,5 →2,5 mm2 (AWG 20 →AWG 14) 2 x 0,5 →1,5 mm2 (AWG 20 →AWG 16)
Housing material Self-extinguishing
Shock test IEC/EN 60068-2-27 15 g - 11 ms
Short interruption on power line acc to IEC/EN 61000-4-11 0 % residual voltage, 250/300 cycles
Weight : casing 22,5 mm 88 866 175 (RQR1)  : 81 g 88 866 176 (RQR6)  : 81 g 88 866 215 (RA2R1)  : 87 g 88 866 300 (RU2R4)  : 86 g 88 866 303 (RU2R3)  : 90 g 88 866 305 (RU2R1)  : 88 g 88 866 385 (RX2R1)  : 88 g
Insulation resistance according to IEC/EN 60664-1 > 500 MΩ (500 V⎓)

Technical sketches

RQR1

RQR1

2 changeover relay output (RQR1)

2 changeover relay output (RQR1)

Function Q

Function Q
Star-delta
Copie de (Anglais) PH 88865115

Share
Share
diam ut dolor. consectetur venenatis felis commodo elementum accumsan Lorem vulputate,