CTR24 orange backlighting

KEY FEATURES

  • Display : 8-digit LCD, height 8 mm
  • Built-in module for voltage inputs 10 →260 V∿/\⎓ (2224-2324)
  • 4 timing ranges : 99,999.99 hrs - 99,999.59 hrs - 999,999.9 s - 9,999 hrs 59 min 59 s
  • Powered by a lithium battery, service life 8 years
  • Reset on panel or external with inhibition option
  • Backlit model (2323-2333-2324)
  • Accessories for 50 x 25 mm cut-out
DescriptionFunctionsCode
2323Hour counter, solid state input PNP87622181
2333Hour counter, solid state input NPN87622182
2324Hour counter, voltage input87622190

Specifications


Consumption Backlighting : 24 V⎓ ± 20 % 50 mA
Connection by 8 screw terminals at rear of casing
Connection capacity 1,5 mm2
Fixed using bracket
Degree of protection front face IP 65
Temperature limits use (°C) -10 →+60
Temperature limits stored (°C) -20 →+70
Breakdown voltage EN 610110-1 : 2000 V / 50 Hz / 1 min.
Conformity to standards EN 61000-6-2 - EN 55011 class B
Altitude 2000 m
Certifications UL - cULus (pending) - CE
Weight (g) 50

Function Hour counter
Display 8-digit LCD
Height digits (mm) 8
Time ranges 0 →99 999.99 h 0 →99 999.59 h 0 →9 999 999.9 s 0 →9 999 h 59 min 59 s
Time base : Crystal controlled (Accuracy ± 100)

Start/stop input by PNP or dry contact (terminals 2-6)
Low level 0 →0,7 V⎓
High level 4 →30 V⎓ PNP
Min time closed > 100 ms
Input impedance 100 kΩ PNP

Start/stop input by PNP or dry contact (terminals 2-6)
Low level 0 →0,7 V⎓
High level 3 →30 V⎓
Minimum time closed > 100 ms
Input impedance 1 MΩ

Volt-free contact or open collector (terminals 3-6)
Minimum time closed 50 ms

One start/stop input Two voltage levels (terminals 3-6)
Voltage - Terminals 1-2 10 →260 V∿/⎓
Input impedance 160 KΩ
Minimum pulse time ⎓ 100 ms
Minimum pulse time ∿ 100 ms
Low level 0 →2 V∿/⎓
High level 10 →260 V∿/⎓

Voltage - Terminals 2-3
Minimum pulse time 16 ms
Low level 0 →2 V∿/⎓
High level 10 →260 V∿/⎓

Reset via Inhibited : Terminals 4-6 not connected Active : Terminals 4-6 connected

1 lithium battery - Life (years) 8

Technical sketches

CTR24

CTR24

Fixing strip with clip-on yoke

Fixing strip with clip-on yoke
Legend
1-
Seal
2-
Fixing yoke

Panel cut-out

Panel cut-out

4 appliances

4 appliances

26546843 - Adaptor for 50 x 25 mm cut-out - Fixed with screws

26546843 - Adaptor for 50 x 25 mm cut-out - Fixed with screws

26546844 - Adaptor for 50 x 25 mm cut-out - Fixed with clips

26546844 - Adaptor for 50 x 25 mm cut-out - Fixed with clips
Accessory supplied with the counter

26546840 - DIN rail adaptor

26546840 - DIN rail adaptor

2223-2323

2223-2323
Legend
1-
NC
2-
Start/Stop input
3-
Reset input 100 ms
4-
Enable panel reset
5-
Mode 1 (Time selection)
6-
0 V common/ (BL- only 23xx)
7-
Mode 2 (Time selection)
8-
Backlighting option + 24 V⎓ (only 2323)

2223-2323

2223-2323
Start/Stop input Transistor PNP

2223-2323

2223-2323
Start/Stop input PNP

2233-2333

2233-2333
Legend
1-
NC
2-
Start/Stop input
3-
Reset input 100 ms
4-
Enable panel reset
5-
Mode 1 (Time selection)
6-
0 V common/ (BL- only 23xx)
7-
Mode 2 (Time selection)
8-
Backlighting option + 24 V⎓ (only 2333)

2233-2333

2233-2333
Start/Stop or reset input NPN - Transistor

2233-2333

2233-2333
Start/Stop or reset input PNP - Transistor

2233-2333

2233-2333
Start/Stop or reset input NPN - Transistor

2224-2324

2224-2324
Legend
1-
Start/Stop input
2-
AC/DC common
3-
Reset input
4-
Enable panel reset
5-
Mode 1 (Time selection)
6-
0 V common/ (BL- only 23xx)
7-
Mode 2 (Time selection)
8-
Backlighting option + 24 V⎓ (only 2324)

2224-2324

2224-2324
Start/Stop or reset input - Contact supplied with power

2224-2324

2224-2324
Start/Stop or reset input PNP Transistor or 3-wire PNP proximity sensor for leakage current detector < 1 mA

2224-2324

2224-2324
Start/Stop or reset input NPN Transistor or 3-wire NPN proximity sensor for leakage current detector < 1 mA

2224-2324

2224-2324
Start/Stop or reset input : 2-wire proximity sensor R=470 Ω/2 W for 2-wire leakage current detector ≤ 1 mA

2224-2324

2224-2324
Start/Stop or reset input : 2-wire proximity sensor R=470 Ω/2 W for 2-wire leakage current detector ≤ 1 mA

2224-2324

2224-2324
Start/Stop or reset input : 2-wire proximity sensor R=470 Ω/2 W for 2-wire leakage current detector ≤ 1 mA
PH 87621112

Share
Share
Donec libero leo. adipiscing eleifend vel, Phasellus Curabitur